|
KiCad 8.0KiCad
|
ChotuBot - must have Fun Robot for all ages!
The ChotuBot robotics kit introduces users to three fundamental applications of robotics. Its modular design and adaptability make it suitable for beginners, hobbyists, and STEM education.
The ChotuBot is only based on comparator with three sensors (one selectable at time using jumper) thus comparing the sensor input with the reference voltage via potentiometer.
This allows the calibration to be done for bot against the sensor.
The robot can work as following at a time:
- Line Follower
- Light Follower
- Obstacle Avoider
- Obstacle Follower
- Light Avoider
Along with calibration the left and right Motor actuation can also be changed via swapping the motor connection to the connectors.
ChotuBot - must have Fun Robot for all ages!
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(2)
Log in to post comments.
Reply
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Ankita Pardeshi
-
-
-
Modifying a Hotplate to a Reflow Solder Station
677 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
365 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
879 4 2 -
How to measure weight with Load Cell and HX711
599 0 3
